KOMET polish kit

ROCK HILL, South Carolina—The KOMET LD0707 kit f offers a range of rotary instruments designed to cut, finish, and polish full-contour restorations fabricated of zirconium oxide, lithium disilicate, aluminum oxide, or pressed ceramics. The kit provides four ZR Flash PolishersTM and three ZR Diamonds, all conveniently arranged and secured in a stainless-steel, sterilizable bur block. These instruments feature distinct polishing and cutting characteristics that address the material properties of today’s generation of dental ceramics. To recontour, adjust, or finish a zirconia, lithium-disilicate, or other high-strength ceramic crown—or to gain endo access through or remove high-strength ceramic restorations—KOMET’s ZR DiamondsTM are each engineered with a permanently bonded, densely packed diamond layer to meet the challenges of these new materials at chairside or in the lab. The coarse-grit ZR Diamonds provides a performance-to-service life ratio, and the medium-grit versions are suitable for a range of adjustment procedures. For seating adjustments, preparing endodontic access, or crown removal, KOMET ZR Diamonds save chair time and help optimize the quality of all-ceramic restorations.Related information, ciick here.The kit’s ZR Diamond selection includes a medium-grit, egg-shaped diamond (ZR379 FG-014) for minor adjustments and features blue and white color coding for easy identification; a coarse-grit diamond (ZR6274 FG-016) for adjustments to crown anatomy, identified by green and white rings; and the 4ZR FG-014 crown-cutter diamond, with a gold shank and a white ring, for cutting or removing high-strength ceramic crowns.To meet the preliminary and final-polishing requirements of high-strength ceramic materials at chairside, KOMET’s ZR Flash Polishers smooth, polish, and impart a high shine when applied to restorations fabricated of zirconia, lithium disilicate, aluminum oxide, and pressed ceramics. Incorporating interspersed diamonds for consistent, reliable performance and a long working life, the polishers produce results in just two steps, each of which can be easily identified by the color of the ZR Flash Polisher: blue for smoothing and pre-polishing and light gray for high-shine final polishing. The ZR Flash Polishers in the KOMET LD0707 kit include a blue cup-shaped polisher (94022C RA.060), a light-gray cup-shaped polisher (94022F RA.060), a blue flame-shaped polisher (94020C RA.040), and a light-gray flame-shaped polisher (94020F RA.040). They have a golden shank as a distinctive visual mark.The KOMET LD0707 kit of precision-engineered and carefully constructed instruments helps maximize the potential of full-contour all-ceramic restorations and helps minimize seating challenges.For more information, call (888) 566-3887 or visit www.komet-usa.com.To comment on this product, go to community.pennwelldentalgroup.com/.