Advances in orthodontic technology make for faster, more comfortable treatment

Dr. John Graham discusses the latest orthodontic technology from in-office cone beam CT scanners to orthodontic miniscrews, clear braces, passive self-ligating braces, and custom smile design.

Pennwell web 133 200

By John Graham, DDS, MD

Modern orthodontic practices have evolved considerably over the last 20 years. Back then, tooth extractions were all too frequent and large, traditional one-size-fits-all brackets and wires were the standard of care.

For orthodontic practitioners, adopting the latest technology can help you deliver an enhanced level of treatment and impressive results for your patients that can contribute significantly to a thriving practice. For general dentists, when it comes time to refer a patient to orthodontic treatment, look to specialists who have adopted the latest technology to ensure the favorable outcomes for your patients who trust and value your recommendation.

Certainly there still remains no substitute for the skill, experience, and education of a well-trained orthodontic practitioner. However, contemporary treatment philosophies are changing the way we treat the vast majority of patients. The improvements in tools and techniques enable us to achieve great results with far less discomfort and in a much shorter treatment time than was ever before possible, thanks to these landmark innovations in modern orthodontia.

In-office cone beam CT scanners

The introduction of cone beam CT scanning to the practice of orthodontics is revolutionizing the diagnosis and treatment planning for today’s patients. These three-dimensional images of the entire skull, jaw, and underlying bone structure provide a much clearer picture of the complete dentition and other structures, and reveal much greater detail about the patient’s symptoms. The ability to manipulate and view these images from any angle is an incredibly powerful tool in treatment planning and evaluation — much better than the hazy, two-dimensional shadows we get from conventional X-rays.

There has been considerable debate concerning the risk of radiation exposure with in-office CT scanning. However, a typical five-second CBCT actually only exposes the patient to about as much radiation as two conventional panoramic X-rays, and much less than even a full series of dental X-rays. However, the volume of data these images provide and the advantages they afford the practitioner in arriving at a more thorough, accurate diagnosis far outweigh the risk.

Orthodontic miniscrews

Surgical-grade titanium screws have been a part of modern oral surgery practices for quite some time, and these temporary anchorage devices, or TADs, are now finding an exciting new niche in orthodontic treatment as well. TADs enable us to overcome the challenge of unwanted movement in the anchor teeth (typically the molars), by providing a secure, fixed anchor point in the bone that can be used as leverage to affect movement in the teeth and eliminate unwanted movement elsewhere. TADs can be placed with the use of just a small amount of topical anesthesia applied to the gingiva, making the procedure virtually painless for the patient. Once treatment is completed, the TADs are removed.

Custom smile design

One of the most exciting new treatment philosophies to emerge in recent years is a unique method of indirect bonding combined with the use of custom-designed bracket and wires. Called Insignia, it is the first and only customized smile design system to incorporate 3-D treatment planning software as well as brackets and wires customized specifically for each patient.

The Insignia software converts a typical set of impressions into a precision 3-D virtual model of the patient’s teeth. The orthodontist can then make any modifications desired to achieve the ideal smile for that patient. The orthodontist can even show the final results to the patient. The brackets are manufactured and then placed on the teeth with the use of precision placement guides — or jigs — for the most accurate level of indirect bonding. A series of corresponding arch wires is also provided to work in conjunction with the customized brackets to maximize efficient tooth movement.

Moreover, it is often more comfortable for the patient compared with traditional braces and provides a truly customized smile, having been designed with the patient’s unique dental and facial features in mind.

Passive self-ligating braces

Perhaps one of the most radical changes in the orthodontic industry has been a new understanding of how friction and ligation forces work to affect tooth movement. Conventional twin brackets use elastic ligatures or steel wire ties to apply pressure to the bracket and move the tooth into place with the arch wire’s guidance. This system of traditional or active ligation results in significant friction between the wire and the bracket, requiring heavier forces to move the teeth. This often results in significant patient discomfort and slower treatment time.

Unlike traditional ligating systems, new passive self-ligating brackets use a slide mechanism that opens to allow the provider to place the wire inside and then close it, creating a slot where the wire is free to glide inside. This approach not only reduces friction and pressure, but also results in more effective forces that make treatment more comfortable for the patient. This new approach also yields much more impressive results — including the ability to alleviate crowding very often without the use of rapid palatal expanders and significantly eliminating the need for extractions.

Clear brackets

The advent of clear tray-style aligners has attracted the attention of many patients who want to improve their smile but who would prefer to avoid the metal-mouth look of braces. However, the problem with clear aligners is that they are not effective for achieving significant tooth movement, and they often take much longer to work compared to regular braces.

To give patients the results they want with the esthetics they desire, innovative new clear brackets like the Damon Clear system are virtually invisible and highly resistant to staining and discoloring compared with other clear brackets on the market. These passive self-ligating clear brackets deliver the best of both worlds: precise, comfortable treatment with discreet appliances that work quickly and effectively to speed orthodontic treatment.

Like all medical technologies, the tools and techniques for modern orthodontic treatment are constantly evolving. These innovative advances enable dental professionals to deliver better results and greater comfort for the patient while improving practice efficiency and growth. By remaining aware of the latest technologies, orthodontic specialists are better equipped to help guide their patients in choosing the latest, most appropriate treatment options available to achieve their ultimate desired result.

For more information on the specific orthodontic systems and appliances mentioned here, visit www.ormco.com.

Pennwell web 133 200Dr. John Graham is a practicing orthodontist in Litchfield Park, Ariz., and a renowned innovator and educator in the field, lecturing worldwide to both doctors and staff on the most advanced orthodontic treatment philosophies available. He is the only orthodontist in Arizona, and one of only a handful in the United States who is also a physician. He is the co-author of several orthodontic textbook chapters, and has written many professional journal articles. He is a member of the American Dental Association, American Medical Association, American Association of Orthodontists, American Cleft Palate/Craniofacial Association, Arizona Dental Association, Pacific Coast Society of Orthodontists, and the Progressive Orthodontic Study Club. Dr. Graham is a contributing editor for both the Journal of Clinical Orthodontics and Orthotown, and is a reviewer for the journal ORTHODONTICS: The art and practice of dentofacial enhancement.

More in Orthodontics